Driver controls
SwitchLogic
Ten illuminated switches on one CAN connection.
SwitchLogic with its ten illuminated switches.
What it does
- Ten illuminated switches share one four-wire connection for power and CAN.
- Software-switchable 120 Ω CAN termination, so it can sit at the end or middle of the bus.
- USB-C for setup, closed by a snap-in cover in normal use.
- Designed to mount on a standard GoPro mount.
Specifications
| Switches | 10 illuminated, replaceable caps |
|---|---|
| Connection | Micro-Fit 3.0, 4-position: 12 V, ground, CAN H, CAN L |
| Processor | Microcontroller with dedicated CAN controller |
| PC connection | USB-C |
| Mounting | Standard GoPro mount, through a slide-on dovetail adapter |
Pinout
PowerGroundCAN HCAN L
Power and CAN
Molex Micro-Fit 3.0, 4-position. Pin positions are schematic.
- 112 V
- 2Ground
- 3CAN H
- 4CAN L
Not to scale. Check the numbers molded on the connector before wiring. Pin colors only show each pin's function. They don't reflect the actual wire colors of any included pigtail.
Before you buy
- The connector is on the back of the case, so leave room behind it for the harness.